400mW 26dbm Wireless Indoor Multi-Client Bridge/AP/ WDS ECB-3220
AVAILABLE NOW
* Product Description :
The Wireless Multi-Client Bridge/Access Point/ WDS (wireless distribution
system) operates seamlessly in the 2.4 GHz frequency spectrum supporting the
802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless
standards. It's the best way to add wireless capability to your existing wired
network, or to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless transmissions
through 64/128-bit WEP data encryption and also supports WPA. The MAC address
filter lets you select exactly which stations should have access to your
network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll
experience the best wireless connectivity available today.
* Product Features :
Features Benefits
High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such
as MPEG video streaming
IEEE 802.11/b/g Compliant Fully Interoperable with IEEE 802.11b/IEEE802.11g
compliant devices
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer
data between two buildings or multiple buildings
Plug and Play No driver needed, easy and quick to connect your Ethernet device
to Wireless
WPA (Wi-Fi Protected Access) Powerful data security
Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases
efficiency of the network
DHCP Client/ Server Simplifies network administration
WDS (Wireless Distributed System) Make wireless AP and Bridge mode
simultaneously as a wireless repeater
MAC address filtering (AP Mode) Ensures secure network connection
Power-over-Ethernet (IEEE802.3af) Flexible Access Point locations and cost
savings
Output Power Controllable Adapts for external antennas to be any certification
top
* Spec. :
General
Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatibility IEEE 802.11g/ IEEE 802.11b
Power Requirements Power Supply: 90 to 240 VDC +/- 10％ (depends on different
countries)
Device: 12 V/ 1A
Status LEDs LAN: Link, WLAN: Link, Power: on/off
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
RF Information
Frequency Band 2.400～2.484 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Operating Channels 11 for North America, 14 for Japan, 13 for Europe,
Receive Sensitivity (Typical) -94dBm @ 1Mbps, -92dBm @ 2Mbps,
-89dBm @ 5.5Mbps, -86dBm @ 11Mbps,
-92dBm @ 6Mbps, -90dBm @ 9Mbps
-88dBm @ 12Mbps, -86dBm @ 18Mbps,
-83dBm @ 24Mbps, -79dBm @ 36Mbps,
-74dBm @ 48Mbps, -72dBm @ 54Mbps
Available transmit power
(Typical) 25 min dBm @1 ~ 24 Mbps
23 +/- 2dBm @36Mbps
21 +/- 2dBm @48Mbps
20 +/- 2dBm @54Mbps
RF Connector TNC Type (Female Reverse)
Networking
Topology Ad-Hoc, Infrastructure
Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/
WDS
Interface One 10/100Mbps RJ-45 LAN Port
Security IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in
AP Mode
WPA2/ WPA/ Pre-share Key (PSK)/ AES/ TKIP
MAC address filtering
Hide SSID in beacons
IP Auto-configuration DHCP client/server
Management
Configuration Web-based configuration (HTTP)
Telnet configuration
SNMP V1(MIBI, MIBII)
Firmware Upgrade Upgrade firmware via web-browser
Environmental
Temperature Range Operating: -10C to 60C (14F to 140F)
Storage: -40Cto 70C (-40F to 158F)
Humidity (non-condensing) 5%~95% Typical